Instructions

Subscription to signals

To start to receive signals to you it is required:
1. To be registered in system.
2. Âîéòè â "Cabinet".
3. Download and setup SignaliForex Client.
4. To adjust ways of reception of signals at your personal cabinet.

SignaliForex Client


Application sheet
The description of the work of the system
Receive the trade signals free of charge
Must be installed
Installation of SignaliForex Client
Authorization and getting of the signals
Description of the table in the program
The settings of the program
Possible mistakes

Application sheet

Up You need to install:
1. Terminal Meta Trader 4 of one of the Dealing Centers.
2. Opened demo account or real account in one of the Dealing Centers.
3. Microsoft .NET Framework 2.0 or above.
Installation and launch:
1.Close the terminal MetaTrader 4, if it is open
2.Launch SignaliForex Client.exe (it is in the archive together with this instruction), install it to the folder with Metatrader. For example: C: \Program Files\Broco Trader
3.Launch the terminal. Press Ctrl+O. Advisers. Put the ticks as is shown on the picture:

4.Click SignaliForex.ru twice in the navigator, scripts. Press OK.
5.The program has launched
6.On the top type the e-mail password from the site. Press Start. And you receive the signals from analysts. The program will trade by signals itself. Later you may put down everything you need in the settings. The explanation of the settings is in the next instruction.
The program and the terminal should always be opened to receive the fresh signals quickly.

The description of the work of the system

1.SignaliForex Client consists of 2 parts:
1.1.The program, which receives and reflects the signals and where you can set the lot – it is where you type login and password.

1.2.Script, which trades by the received signals. It is in the terminal in the section Scripts.

2. If the program and script work together correctly, then there will be the inscription SignaliForex Client is connected on the graph on the top to the left.It is reflected only on one graph, on which you have launched the script.

3.After the analyst opened his position and before the script opened your position approximately 5 seconds pass.
4.If the analyst had placed the signals of Market execution, that is Sell and Buy, and in 10 minutes you didn’t switch on SignaliForex Client, then these signals would be deleted. It is done because you can open the position late, when it is unprofitable.
5. If the analyst had placed the Delayed orders, that is Sell Stop/Buy Stop and Sell Limit/Buy Limit, and in 30 minutes you didn’t switch on SignaliForex Client, then these signals would be deleted. It is done because you can open the position late, when it is unprofitable.
6. The program and the terminal should always be opened to receive fresh signals quickly.

Receive the trade signals free of charge

To receive the signals free of charge you should open a real account by our means and indicate us as your partners.

1. You can open a real account by our means at the following brokers using the link below.
Pay attention! If you want to register the account using our link you have to clear cookies and restart the browser. Also while opening the account indicate our partner code where it is necessary.


Admiral Markets

Trading for everyone.




Alpari

The broker with perfect reputation.




FrontStocks

Spread in 2 points on the most popular forex pairs




Instaforex

The best broker in Asia

If you have already opened a trade account at one of recommended by us brokers, the following options of your actions are possible.

1) Broco.
In order not to open a new account you have to complete «The form of identification of a client» and send it to us by e-mail. The top part of the form is already completed by us. After that we will contact the technical support of Broco, you will be transferred to our partner group and you will be able to receive the signals from the chosen trader free of charge.

2) InstaForex.
In order not to open a new account you have to tell us the number of the account and the name of the person who opened the account.
Then we will pass your information to the broker. If your account is not already in the partner group of another partner, you will be transferred to our partner group and you will be able to receive the signals from the chosen trader free of charge.
Otherwise, you have to open a new trade account on your name and enter our partner code SSO during the registration, after that with the help of the inner transfer system you can transfer your money from the current account to the new account absolutely free of charge without any commission. Then you will be able to receive the signals from the chosen trader free of charge.


3) Admiral Markets.
In order not to open a new account, you have to write a letter to Admiral Markets and tell them, that the account ¹**** was opened on the recommendation of the site signaliforex.ru, and indicate our partner code – 571.
You have to send the letter from the e-mail that was indicated by you during the registration and opening the account.
For identification of the person you have to indicate the telephone password to the account or attach the copy of the passport to the letter.
After that you will be transferred to our partner group and you will be able to receive the signals from the chosen trader free of charge.

4) Other brokers do not allow transferring the users, and you will have to open a new account and transfer your money to it. If the broker allows the transfer of money between the accounts, you can do it yourself.

2. Enter the Personal Cabinet, the section My profile
3. In the section “The number of the real account that was opened by our means” indicate the number of the account and broker and press the button “Change number of real account”
4. During 24 hours we check if that account was really opened by our means and inform you by e-mail.
5. After the successful checking you may add or delete the subscription just pressing the button or near the analyst, in the rating of the analysts, in personal cabinet or on the main page.
6. And you will receive any signals unlimitedly and free of charge. You can switch on/off the analysts in the personal cabinet.

You must have installed

1. The terminal Meta Trader 4 of one of the Dealing Centers.
You can download the terminal Broco here:
http://files.brocompany.com/soft/bc4/bc4setup_trade.exe
2. Opened demo account or a real account in one of the Dealing Centers.
After finishing of the free period of using the signals you may receive the signals unlimited, if you open a real account by means of our partners, for example:
http://signaliforex.ru/broker_real.html
or
http://ru.brocompany.com/how-to-become-a-customer/?br=12366 When you open the account indicate our partner number - 12366.
Or trade on your account, having paid the signals of one or several analysts here: http://signaliforex.ru/pay.html
3. Microsoft .NET Framework 2.0 or above.
You can download it here: http://download.microsoft.com/download/5/6/7/567758a3-759e-473e-bf8f-52154438565a/dotnetfx.exe
4. Archiver WinRAR.

The installation of SignaliForex Client

Download SignaliForex Client
1. Make sure, that the terminal MetaTrader is off.
2. Click twice on the archive SignaliForex Client.exe (it is situated in the downloaded archive SignaliForex Client).
3. Press the button BROWSE and indicate the folder with our Metatrader.
For example, C:\Program Files\Broco Trader
4. Press the button Extract.
5. The files will be copied to the folder. That is all. The installation is completed.

Authorization and receiving of the signals

1. Open our Metatrader and on the top: Service – Settings.

2. Inlay Advisors.
Put or delete the ticks as is shown on the picture:

And press OK.
3. Open the Navigator, the section scripts. Click twice on SignaliForex Client:

4. In the window, that opened, in the inlay Inputs there is an item Sound.

If there is “true” then there will be a message with beep when you open/close/modify the position.
If there is “false” there will be no message with beep.
In the inlay General we put such parameters:

press ÎÊ.
5. The window of our program, which will receive the signals, opens.

6. On the top enter the e-mail and the password, which you entered during the registration.
7. Press the button Start. It is situated to the right. At the bottom of the window there will be the sign “Reception of the list of analysts”.

If the e-mail and password were entered correctly, there would be the sign: "There are no new signals" and time or count of new signals.

If the e-mail and password were entered incorrectly, there will be the sign: Wrong login or password”.

8. If everything is fine and the program is connected to your terminal, then on the top to the left, on the graph there will be the sign SignaliForex Client is connected.
It is reflected only on one graph, on which you have launched the script.

9. That is all. Now we receive the signals from the analysts, to whom you have subscribed on the site.
The program itself will open/close/modify the signals, which the analysts will send. By default settings you may easily receive the signals. The delay after the analyst opens the positions is approximately 5 seconds. The program and the terminal should be opened all the time to get fresh signals quickly.

The description of the table is in the program


¹ of the signal – is the same as the number of the signal in your personal cabinet, on the site, in the section The history of all signals (link http://signaliforex.ru/history.html)
Trade – if you allowed the analyst to trade in the settings of your personal cabinet on the site, then there will be 1 and the bidding will be conducted. If you didn’t allow the analyst to trade, but you want to receive the signals, there will be 0.
Analyst – the name of the analyst that gives the signal.
Date, time – date and time of the delivery of the signal.
Instrument – the instrument, by which the position opens.
Type – type of the operation.
Entry – the price of the buy/sell.
TakeProfit, StopLoss - TakeProfit, StopLoss, which the analyst indicated.
Lot – lot, which the analyst put.
Risk and commentary – if the analyst wants, he indicates these fields.

The settings of the program

1. In the program, on the top press the button Settings:

2. A window will open:

3. Settings in details:
Query every n seconds – in what interval the program will inquire new signals. No less than 3 seconds.
Save the password – it saves the password encoded on your computer in order not to enter it iteratively. I ADVISE YOU NOT TO SAVE THE PASSWORD!!!
Minimize to tray – if you do not need the program, after reducing it will be in the tray (at the bottom, to the right, on the taskbar).
To trade by signals – if you just want to receive the signals and you don’t want the program to trade by signals, you have to remove the tick. If you want the program to trade automatically by signals, there must be a tick.
Don’t change the lot – the positions will open with the same lot, as it was opened by analyst.
Percent of the analyst’s lot – if you put 20% and the analyst opened with lot 1, then you will open the position with lot 0.2. It means – analyst’s lot*your percent. In this example it is 1*20%=0.2
Your lot – all positions will open with this lot. For example: you indicated 0.02. And the analyst sent you a signal with lot 0.04. The program will open the position with lot 0.02, which you indicated.
Percent of possible loss from free deposit –
For example: the analyst sent a signal to open Buy EURUSD in 1.4125 and stop in 1.4015. The difference is 1.4125-1.4015=0.0110, which is 110 points. And your deposit is 500$. You indicated 5% in the settings. It means 500*5%=25$. So you may lose 5% or 25% of your deposit in the case of stop. Then the lot is calculated in this way: 25$/110 points*100000*0.0001=0,02
I remind you, that profit is calculated in the following way:
pips*100000*0.0001*lot.
If the analyst didn’t indicate stop or you didn’t indicate the manual stop, then the lot is taken as from the analyst.
Manual StopLoss (in pips) – if you are afraid of losing your money and you want to put down the lot yourself, then put down this value. Also you can put down this value and lot into the function “The percent of possible loss from free deposit” and then the lot will be calculated according to the percent and stop, that you indicated.
Manual TakeProfit (in pips) – If you notice that the analyst often makes profit, and then the price goes down, and only several points are enough for you, by the big lot, then you can put down this value on the value, which is convenient for you. BUT before this study carefully the statistics of the analyst.
Equivalence of the symbols - For example: the analyst sent you the signal GBPUSD, and you want to open this pair on mini. Then you indicate GBPUSDm. For this press plus at the bottom and type in. Next press save.
4. To apply the settings you have to press OK.

Possible mistakes

Problem:
When in terminal you click twice SignaliForex Client, in the section scripts, press OK, after the settings of sound. A mistake comes out – “Mistake of initialization” or “mistake while initializing the application”.
Solution:
Most likely you haven’t installed Microsoft .NET Framework 2.0 or above. You can download it using the link –
http://download.microsoft.com/download/5/6/7/567758a3-759e-473e-bf8f-52154438565a/dotnetfx.exe

Problem:
SignaliForex Client didn’t appear in the terminal, in section scripts.
Solution:
Close the terminal. Reinstall SignaliForex Client.exe, which is in the same archive with this instruction, into the same folder with your terminal. If you installed the terminal Broco, the path is going to be like this - C:\Program Files\Broco Trader Replace all files if it acquires. Launch the terminal.
Problem:
While opening the position there was a mistake “Not enough money for installing lot N”. The script checks if you have enough money for the lot, that was put down by you or the analyst. If it is too much, it picks the nearest lot, that you can put and opens the position.

Trading signals are protected by copyrights. Distribution is forbidden. �
Signaliforex
2008-2024
Main | Support